How do I make Ready-to-Use spray bottle dilution from the Super Concentrate. I have received my Starter kit and am a little uncertain.

This process is quick and easy. It has been designed to be used for all our concentrate products.

Follow these steps:

At your kitchen or bathroom sink top, remove the cap from the concentrate bottle. Release the lock on the white pump that has come with the kit by holding the cap firmly and turning the spout anticlockwise.

Insert the white pump that has come with the kit to the bottle of concentrate product. Prime the pump (2 – 3 pushes) to remove the air from the pump suction tube by filling the tube with the concentrate product. This process allows  the pump to be filled with the liquid being pumped and this liquid forces all the air contained in the tube to escape out.

Fill your empty spray bottle to the Top of the Label with tap water

Then add two full pumps of super concentrate – don’t be tentative.  Be mindful NOT to add the super concentrate to the empty bottle first as you will generate foam and a wee bit of mess

Screw the trigger spray into the spray bottle

Shake the bottle twice to mix

And that’s it, couldn’t be easier

You now have Ready to Use spray to start cleaning

The bottle of Super Concentrate makes 90 bottles of ready to use cleaning product

You just reuse the spray bottle and spray trigger after you have rinsed them clean